Safety information, 1 pictographs used in these instructions – Lenze SMD 0-37kW-22kW User Manual

Page 6

Advertising
background image

4

Lenze 13466184 EDBSL03 v20

EN, DE, FR, IT, ES

Safety information

Operation

Systems including controllers must be equipped with additional monitoring and protection devices

according to the corresponding standards (e.g. technical equipment, regulations for prevention

of accidents, etc.). You are allowed to adapt the controller to your application as described in

the documentation.

DANGER!

• After the controller has been disconnected from the supply voltage, live components

and power connection must not be touched immediately, since capacitors could be

charged. Please observe the corresponding notes on the controller.

• Do not continuously cycle input power to the controller more than once every three

minutes.

• Please close all protective covers and doors during operation.

Explosion Proof Applications

Explosion proof motors that are not rated for inverter use lose their certification when used for

variable speed. Due to the many areas of liability that may be encountered when dealing with

these applications, the following statement of policy applies:
Lenze AC Tech Corporation inverter products are sold with no warranty of fitness for a particular

purpose or warranty of suitability for use with explosion proof motors. Lenze AC Tech Corporation

accepts no responsibility for any direct, incidental or consequential loss, cost or damage that

may arise through the use of AC inverter products in these applications. The purchaser expressly

agrees to assume all risk of any loss, cost or damage that may arise from such application.

1.1

Pictographs used in these instructions

Pictograph

Signal word Meaning

Consequences if ignored

DANGER!

Warning of Hazardous Electrical

Voltage.

Reference to an imminent danger

that may result in death or serious

personal injury if the corresponding

measures are not taken.

WARNING!

Impending or possible danger for

persons

Death or injury

STOP!

Possible damage to equipment

Damage to drive system or its

surroundings

Note

Useful tip: If observed, it will make

using the drive easier

Advertising
This manual is related to the following products: