Lenze EMF2178IB - Manual (Page 64)

6 Electrical installation
Voltage supply
EDKMF2178IB DE/EN/FR 6.0
64
l
H2_SpgVersorgg−2178_ext_dc_spgversorgg
Voltage supply
Internal voltage supply
)
Note!
Internal voltage supply has been selected in the case of standard devices with
an extended AIF interface opening (e.g. front of 8200 vector). The area shown
on a grey background in the graphic marks the jumper position.
ƒ By default, this is not supplied internally in the standard device.
ƒ For internal voltage supply place the jumper on the position indicated
below.
In the case of all other device series (9300, ECS), voltage is always supplied
from the standard device.
Lenze setting
(Only external voltage supply possible.)
Internal voltage supply