7 during operation, During operation – Lenze MDSLS Servo spindle motor User Manual
Page 31
Advertising
During operation
6
31
BA 33.0003 EN 1.0
7
During operation
Perform regular inspectionsduring operation. Checkthe drivesapprox. every 50 operating
hours. Pay particular attention to:
ƒ Unusual noises
ƒ Excessively heated surfaces (during normal operation, temperatures can reach up to
140 °C).
ƒ Uneven running
ƒ Increased vibrations
ƒ Loose fixing elements
ƒ Condition of the electrical cables
ƒ Obstructed heat removal
– Deposit build-up on the drive system and in the cooling channels
ƒ Check bellows for tightness
ƒ Check permanent lubrication and grease supply
In case of irregularities or faults: E Ch. 8.
Show/Hide Bookmarks
Advertising