Lenze MDSLS Servo spindle motor - Manual (Page 36)

Maintenance/Repair
Repair
Clearing device
9

36 BA 33.0003 EN 1.0
9.2.4 Clearing device
Fig. 2 Motor MDSLS
After disassembling the motor end guard, the spindle can be traversed by hand. In an
emergency situation, the cover can be removed and the motor shaft can be turned with a
10-mm wrench.

Stop!
With opened end guard, the encoder system is unprotected - the enclosure is
cancelled. Look out for sensitive components!
Ensure correct seating of the seals during the assembly!
9.3 Repair
ƒ It is recommended to have all repairs performed by Lenze Service.
ƒ Delivery of spare parts is available upon request.
Show/Hide Bookmarks