Lenze MDSLS Servo spindle motor - Manual (Page 7)

Preface and general information
Legal regulations
1

7 BA 33.0003 EN 1.0
1.4 Legal regulations
Labelling Nameplate CE designation Manufacturer g
Lenze motors are uniquely
designated by the content of the
nameplate.
Conforming to EC ”Low-Voltage
Directive”
Lenze Drive Systems GmbH
Postfach 10 13 52
D-31763 Hameln
Application as
directed
Servo spindle motors type MDSLS
z must only be operated under the operating conditions prescribed in these instructions.
z
are components:
– for use as small drives.
– for installation in a machine.
– for assembly with other components into a machine.
z meet the protection requirements of the EC ”Low-Voltage Directive”.
z are not machines in the sense of the EC Machine Directive.
z are not household appliances, but as components solely intended for further application for commercial use.
Drive systems with servo spindle motor type MDSLS
z meet the EC Directive ”Electromagnetic compatibility” if they are installed according to the specifications of
the CE-typical drive system.
z
are applicable:
– in public and non-public mains.
– in industrial as well as residential areas.
z The end user is responsible for adhering to the EC directives in the machine application.
Any other use is considered unintended!
Liability z The information, data, and notes in these instructions were state of the art at the time of printing. Claims
referring to motors which have already been supplied cannot be derived from the information, illustrations,
and descriptions.
z The process-related notes and circuit sections used in these instructions are suggestions whose suitability for
the respective application must be checked. Lenze assumes no guarantee for the suitability of the listed
procedures and circuit samples.
z The information in these instructions describes the features of the products without assuring them.
z No liability is accepted for damages and malfunctions caused by:
– disregarding the operating instructions
– unauthorised modifications to the motors
– operating mistakes
– improper working at and with the motors.
Warranty
z
Conditions of warranty: see terms of sale and delivery of Lenze Drive Systems GmbH.
z Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
z The warranty is void where liability claims cannot be made.
Disposal Material Recycle Dispose p
Metal
D
-
Plastic
D
-
Assembled PCBs -
D
Show/Hide Bookmarks