Lenze MDSLS Servo spindle motor - Manual (Page 38)

Appendix
Manufacturer’s Certification
10

38 BA 33.0003 EN 1.0

Applied standards and regulations:
ISO 496, 1973-12
Shaft heights for driving and driven machines
IEC 72
– IEC 72-1, 1991-02
Dimensions and power for electrical rotating machines
Housing sizes 56 - 400; flange sizes 55 - 1080
DIN 42948, 1965-11 Mounting flanges for electrical machines
DIN 42955, 1981-12 Concentricity of shaft ends, concentricity and axial eccentricity of mounting flanges of
electrical rotating machines
DIN 42961, 1980-06 Rating plates for electrical machines; design
DIN VDE 0100-100, 1982-05
(HD 384.1 S1-1979<H>)
Installing high voltage installations with rated voltages up to 1,000 V
IEC 34
– IEC 34-1, 1994-03
– IEC 34-5, 1991-01
– IEC 34-8, 1972-00
(with 34-8 AMD 1, 1990-10)
– IEC 34-9, 1990-06-00
(with 34-9 AMD 1, 1995-04)
– IEC 34-14, 1982-00-00
(with IEC 34-14 AMD 1, 1988-00)
Rotating electrical machines
Rated data and operating method
Enclosures (IP code)
Terminal designations and direction of rotation
Noise limits
Mechanical vibrations
ISO 8821, 1989-06 Mechanical vibrations - Balancing
VDI 2056, 1964-10 Evaluation criteria for mechanical vibrations of machines
DIN ISO 1940-1, 1993-12 Mechanical vibrations, requirements for balance quality of solid rotors
Show/Hide Bookmarks