Lenze MDSLS Servo spindle motor - Manual (Page 39)

Appendix
EC Declaration of Conformity ’96
10

39 BA 33.0003 EN 1.0
10.2 EC Declaration of Conformity ’96

as defined by the EC Low-Voltage Directive (73/23/EC)
changed by: CE Marking Directive (93/68/EC)
The following products were developed, designed and manufactured in accordance with the
aforementioned EC guideline with sole responsibility of
Lenze Drive Systems GmbH, Postfach 10 13 52, D-31763 Hameln
Lenze Drive Systems GmbH
Postfach 10 13 52
D-31763 Hameln
Site
Groß Berkel
Hans-Lenze Straße 1
D-31855 Aerzen
Phone (05154) 82-0
Fax (05154) 82-21 11
Product: Type designation:
DC motors MGFRK, MGFQU, MGFQK
MGERK, MGEQU, MGEQK
MGSRK, MGSQU, MGSQK
Asynchronous motor DFRA, DERA, DSRA
MDFMA, MDEMA, MDSMA
Servo motors DFVA, DSVA, MDFQA
MDFKA, MDSKA
MDFKS, MDSKS, MDSLS, MDFLS
MCS, MCA
DC winder motors  L12,  F12
 S8,  S6
 S4,  F4
 MF4,  SF4
 LF4
Standards:
EN 60204-1, IEC 204-1
EN 60034, VDE 0530, IEC34
Explanation to the EMC Directive (89/336/EC)
With mains operation at sinusoidal alternating voltage, asynchronous motors meet the requirements of the EC Directive.
“Electromagnetic compatibility” 89/336/EWG under consideration of the standards EN 80081-1 and EN 50082-2.
With inverter or power converter operation, you must observe the EMC notes of the inverter or power converter manufacturer.
If you are using shielded motor supply cables, the shielding is most effective if it is connected with the earth potential of the motor
with the greatest possible surface area (e.g. PG gland made out of metal).
Hameln, March 4th, 2004
(Dr.-Ing. Etienne Nitidem)
Head of Research and Development
Department for Electromechanics
Show/Hide Bookmarks