Lenze EMZ9371BC - Manual (Page 103)

Parameterisation 8200 vector/8200 motec
Menu structure
7
EDK9371BC DE/EN/FR 3.1 103
l
H1 Parametrierung 8200−9371BC_6L
Description Submenus Main menu Description
Display No. Display No.
Only active for standard devices from software version 2.2:
You need to change to the code level to be able to display the signal levels
at the terminals. The signal levels of the analog inputs and outputs are
evaluated with an offset and a gain.
10.13 Monit AIN1 Level at analog input 1
0 ... 100 % (referring to C0034)
10.14 Monit AIN2 Level at analog input 2
0 ... 100 % (referring to C0034)
10.15 Monit AOUT1 Level at analog output 1
0 ... 100 %
(referring to standard I/O: 10 V)
(referring to application I/O: C0424)
10.16 Monit AOUT2 Level at analog output 2
0 ... 100 % (referring to C0424)
10.17 Monit PTC Status of PTC input
0
º open, 1 º closed
10.18 Monit DIGIN Status of digital inputs and status of
input for controller inhibit X3/28
0
º LOW, 1 º HIGH
10.19 Monit DIGOUT Status of digital outputs and status of
NO contact of relay outputs:
0
º LOW, 1 º HIGH
11 LECOM/AIF Configuration for operation with
communication modules
11.1 LECOM setup Serial interface
11.2 AIF setup Process data
11.3 Status words Status word display