Lenze EMZ9371BC User Manual
Page 78
Parameterisation 8200 vector/8200 motec
Change and save parameters
EDK9371BC DE/EN/FR 3.1
78
l
H1 Parametrierung 8200−9371BC_6L
Step
Key sequence
Action
1.
Select menu
z y Z Y
Select the desired menu using the arrow
keys
2.
Change to the code level
Z
Display of the first code in the menu
3.
Select code or subcode
y z
Display of the current parameter value
4.
Change to the parameter level
V
5.
Inhibit the controller if SHPRG
is displayed
S
The drive coasts
6.
Change parameters
A
Z Y
Move the cursor under the digit to be
changed
B
y z
Change the digit
T y
T z
Quick change of digit
7.
Accept the changed parameter
Display of SHPRG or SHPRG
p
T V
Confirm the change to accept the
parameter
OK is displayed
p
is displayed
−
The parameter has been accepted
immediately
8.
Enable the controller if
necessary
U
The drive restarts
9.
Change to the code level
A
V
The operating level is displayed
B
V
The code with the changed parameter is
displayed
10.
Change more parameters
Start again with step 1. or step 3.