Lenze EMZ9371BC - Manual (Page 92)

7 Parameterisation 8200 vector/8200 motec
Menu structure
EDK9371BC DE/EN/FR 3.1 92
l
H1 Parametrierung 8200−9371BC_6L
Description Submenus Main menu Description
Display No. Display No.
5.5 Speed−Ctrl 7 Operation with the fieldbus function
module on FIF (DRIVECOM control)
Frequency setpoint via process data
channel
Actual frequency value via process
data channel
5.5.1 FIF managem Set up fieldbus communication
5.5.2 Freq setpt Frequency setpoint configuration
5.5.3 Actual value Actual frequency value configuration
5.5.4 PCTRL setup Process controller configuration
5.5.5 f limit/ramp Output frequency, acceleration time
and deceleration time configuration
5.5.6 Motor param Motor current control and motor
monitoring configuration
Speed control in the "V/f characteristic control" operating mode
5.6 OpenLoopV/f 0 Analog selection of frequency
setpoint via analog input 1 (AIN1)
5.6.1 Freq setpt Frequency setpoint configuration
5.6.2 f limit/ramp Output frequency, acceleration time
and deceleration time configuration
5.6.3 Motor param Motor current control and motor
monitoring configuration
5.7 OpenLoopV/f 1 Frequency setpoint via parameter
channel (C0046)
5.7.1 Freq setpt Frequency setpoint configuration
5.7.2 f limit/ramp Output frequency, acceleration time
and deceleration time configuration
5.7.3 Motor param Motor current control and motor
monitoring configuration
5.8 OpenLoopV/f 3 Frequency setpoint via AIF process
data channel (AIF−IN.W1)
5.8.1 Freq setpt Frequency setpoint configuration
5.8.2 f limit/ramp Output frequency, acceleration time
and deceleration time configuration
5.8.3 Motor param Motor current control and motor
monitoring configuration