Lenze EMZ9371BC - Manual (Page 90)

7 Parameterisation 8200 vector/8200 motec
Menu structure
EDK9371BC DE/EN/FR 3.1 90
l
H1 Parametrierung 8200−9371BC_6L
Description Submenus Main menu Description
Display No. Display No.
5 Short setup Quick configuration of predefined
applications
Please note the different key
functions for changing from the
submenu to the configuration menu!
l Press
TV
until "Loading ..."
is displayed:
– Change to the configuration
menu, the Lenze setting is
loaded
– Required signals are linked
automatically
– You need to complete the
configuration afterwards
l Press Z :
– Change to the configuration
menu without linking the
signals
– Available configurations can
be edited
Speed control in the "V/f characteristic control" operating mode
5.1 Speed−Ctrl 0 Analog selection of frequency
setpoint via analog input 1 (AIN1)
Digital selection of frequency
setpoint via frequency input (DFIN)
5.1.1 Freq setpt Frequency setpoint configuration
5.1.2 Actual value Actual frequency value configuration
5.1.3 PCTRL setup Process controller configuration
5.1.4 f limit/ramp Output frequency, acceleration time
and deceleration time configuration
5.1.5 Motor param Motor current control and motor
monitoring configuration