Lenze 931W - Manual (Page 40)

Application examples
Menu pages
Setup menu page
7

40 GHB 13.0002-EN 3.1
7.3.1 Setup menu page
Use the Setup menu page to define the access permissions, operating mode and the
parameters of the RS232 interface. The other menu pages can only be used when
communication with the motor has been built-up via the Setup menu page.
The selected operating mode automatically determines the scope of utilization and the
access permissions.
Fig. 5 Representation of the ”Setup” tab

Note!
Enter the interface parameters first (bottom left on the first menu page).
Fig. 6 Serial interface settings
The baud rate is set to 38400 baud by default. For the COM port, please see the hardware
description for your PC.