Lenze 931W - Manual (Page 8)

Preface and general information
Scope of supply
1

8 GHB 13.0002-EN 3.1
1.3 Scope of supply
ƒ 931M/W servo inverter
ƒ Short description
After receipt of the delivery, check immediately whether the items delivered match the
accompanying papers. Lenze does not accept any liability for deficiencies claimed
subsequently.
Claim
ƒ visible transport damage immediately to the forwarder.
ƒ visible deficiencies/incompleteness immediately to your Lenze representative.
1.4 Legal regulations
Labelling Nameplate CE identification Manufacturer
Lenze drive controllers are
definitely identified by the
contents of the nameplate.
In compliance with the EC
Low-Voltage Directive
Lenze GmbH & Co KG
small drives
Postfach 10 13 52
D-31763 Hameln
Application as
directed
931M/Wservo inverters
z must only be operated under the operating conditions prescribed in these Instructions.
z are components
– for the open and closed loop control of variable speed drives,
– for installation in a machine,
– for assembly with other components to form a machine.
z
comply with the requirements of the Low-Voltage Directive.
z
are not machines for the purpose of the Machinery Directive.
z are not to be used as domestic appliances, but only for industrial purposes.
Drive systems with 931M/W servo inverters
z
comply with the EMC Directive if they are installed according to the guidelines of CE-typical drive systems.
z can be used
– for operation on public and non-public mains
– for operation in industrial premises.
z The user is responsible for the compliance of his application with the EC directives.
Any other use shall be deemed as inappropriate!
Liability z The information, data, and notes in these instructions met the state of the art at the time of printing.
Claims on modifications referring to controllers which have already been supplied cannot be derived from
the information, illustrations, and descriptions.
z
The specifications, processes, and circuitry described in these instructions are for guidance only and must
be adapted to your own specific application. Lenze does not take responsibility for the suitability of the
process and circuit proposals.
z Lenze does not accept any liability for damage and operating interference caused by:
– disregarding of the Operating Instructions
– unauthorised changes with regard to the drive controllers
– operating errors
– improper working on and with the drive controllers
Warranty z Terms of warranty: see Sales and Delivery Conditions of Lenze GmbH & Co KG small drives.
z
Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
z The warranty is void in all cases where liability claims cannot be made.