Lenze 931W - Manual (Page 41)

Application examples
Menu pages
Setup menu page
7

41 GHB 13.0002-EN 3.1

Note!
In the default setting, the individual operating levels are not
password-protected. If you want to use a password, please consider that the
servo inverter must be returned to Lenze for password deactivation when the
password gets lost!
In this example, log in under ”Online Level 3”. In this operating level, you can select speed
and torque for a trial operation and start the driving program. You will be asked for a
password. Do not enter anything and confirm with ”OK”.
If the power supply and the PC have been properly connected, the individual driving
programs will be written to the PC when changing from ”Offline” to ”Online Level 3”. This
canbeseeninthestatusbarwheretheprogramcountsfrom drivingprogram 0to99.Now,
you have an online connection with the drive.
On the lower edge of the operating program on the left next to the Lenze icon, the
connection status is also displayed. Ifyou have established the connection tothe drive, the
message ”Online” is displayed there in green font. If you are not able to establish a
connection, an error is indicated.