Lenze 931W - Manual (Page 42)

Application examples
Menu pages
Status menu page
7

42 GHB 13.0002-EN 3.1
7.3.2 Status menu page
This menu page shows:
ƒ Warnings not leading to the disconnection of the amplifier power stage;
ƒ Fault messages leading to the disconnection of the amplifier power stage;
ƒ Status messages visualizing the response and general operating status activated by
a warning or fault message;
ƒ
Actual values and units of the operating program reflecting the current physical and
electrical operating states.
With a proper connection, you can see the current status of the drive, e.g.
ƒ motor temperature,
ƒ DC-bus voltage,
ƒ drive status in the ”Status” bar.
To start the drive, switch to the ”Driving program” menu page.
Fig. 7 Representation of the ”Status” tab