Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 106)

Visualising in the ApplicationTemplate
Defining the properties of buttons
106
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• Note: Activate the ; Insert with namespace prefix option.
Use the Input assistance from the Application element
• ...select the desired function block that provides the data for the corresponding
visualization page.
10.2 Defining the properties of buttons

How to proceed:
1. Extend Vis_eFrame in the A71_LocalSources\Structs ENUM folder:
Add the name of the visualization manually, example: MVis_Module3
Note: The arrangement of entries in the ENUM Vis_eFrame has to correspond to the
selected order of #0 Frame of the L_Main visualization.

2. Go to A20_Visualisation\SubVisu folder and select the Keys_Main visualization.
3. Create a new button.
• Highlight the Module 2 button: