Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 164)

Application example: Flying saw
Application example: Extending the visualization
164
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• From the available visualisations, select the visualisations of the previously created
machine modules that are to be referenced in the visualisation frame:
The sequence visible here of the selected visualisations then corresponds to the order of
the buttons/control elements.
3. Go to the Properties dialog box and enter the corresponding variable for every single
visualization in the References area.
O
4. Go to the .A71_LocalSources folder and extend the Vis_eFrame enumeration data
type by the additional module visualizations.