Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 144)

Appendix
Recipe manager
144
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Allocate the desired name:
• Click the Open button to insert the recipe definition.
• Result: The recipe definition is inserted in the A90_Resources folder:
12.4.3 Recipe definition - assigning variables
Use the input assistance to assign the corresponding variables to a newly created recipe definition.

How to proceed:
1. Double-click the desired recipe definition (example: MM_Par_Modul1)
2. On the tab of the recipe definition (example: MM_Par_Modul1), double-click in the
Variable column:
• Click the button to start the Input assistance.
3. Use the Input assistance to assign the variables of the machine module to the recipe
definition:
• Confirm the entry by clicking OK