Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 59)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
59
Working with the ApplicationTemplate
Inserting an axis
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. Assign the name of the instance (example: MM_Dcl.Module2.App1) to the module
application:
5. Assign the axis to the module application. The precondition for this is that the actual
machine structure is mapped in the »PLC Designer« project.  Mapping the actual machine
structure in the »PLC Designer« ( 40)
(The dwTestCounter input does not receive a transfer variable.)
• Select the desired axis (example: SM_Drive_ETC_9400HL)
• Click OK to insert the axis.
• The axis is connected to the machine module: