Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 35)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
35
Opening the ApplicationTemplate
Getting started - operating the ApplicationTemplate
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.6 Getting started - operating the ApplicationTemplate
In the Device view, select the A20_Visualisation folder: Double-click the L_Main visualization.
Welcome page - L_Main visualization
The user interface of the visualization is divided into the following areas:
[7-1] Example: ApplicationTemplateCounter with two machine modules (module 1, module 2)
 Select machine module  Error block visualization
 Detailed view of the machine modules  ApplicationTemplate visualization
 Select error overview  Buttons: Select status/acknowledge error message
 State machine