Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 108)

Visualising in the ApplicationTemplate
Adding a visualization: Standard procedure
108
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Allocate the desired name of the
visualization.
Click Open.
• The visualization has been added in the
A20 Visualisation folder.
• Create a Frame in the visualization:
Create a frame from the Tools dialog
box via drag&drop.
P
• Adapt the frame size.
• Execute the Frame selection command
by right-clicking into the frame.
• Accept the desired visualization to
the selection under Available
visualisations by clicking the >
button.
• Click OK to accept the visualization
to the frame.
• Example : In order to accept the global
error list, select the
L_EATP.L_EATP_VisErrorList entry.
• Adapt/position the size of the
visualization.
• For the error list (Error List), no further
assignments are required.
Result: The visualization is now
serviceable