Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 65)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
65
Working with the ApplicationTemplate
Creating module applications
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[8-5] Linkage of machine module MFB, module structure tree (MMT), and task assignment of the module application (MAC)
8.10.3 Programming with the module application
In order to structure the subfunction of a module application, the ApplicationTemplate actions are
to be used.  Programming recommendations for structuring ( 27)

Tip!
For programming with the ApplicationTemplate it is recommended to use the methods
included in the ApplicationTemplate.
 State machine ( 77)
 Error handling ( 92)
 The AppChannelData structure(ACD) ( 73)
Where do I find what in the
device view?
• MFB

Note!
A machine module must contain at least one module application which is assigned to a
ModulAppCall (and thus to a task)!