Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 143)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
143
Appendix
Recipe manager
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.4.1 Precondition
• Every machine module has an MPar_sc<M-identifier> interface, which contains the parameters
for the corresponding machine module.
• Every machine module interface must be instanced globally under MM_Par in the
A55_VarLists folder:
12.4.2 Creating the recipe definition
By means of the recipe manager, different recipe definitions can be actively used within a project.

How to proceed:
1. In the A90_Resources folder, click the Recipe manager:
• Use this dialog window to create/save a recipe definition.
2. By right-clicking the Recipe manager , execute the following command in the
A90_Resourcesfolder:
Add object Recipe definition