Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 167)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
167
Application example: Flying saw
State machine
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Go to the Tools dialog box and select the Common Controls section. Insert the buttons
into the visualization interface:
3. Assign the variables.
Go to the Properties dialog box and select the Input configuration\Tab\Variable. Assign the
previously created xReady variable.
• Structure MVis_scA01_MachineControl
• Location: Folder A55_VarLists\MM_Vis
4. Go to the Properties dialog box and click Configure in the Input configuration area to
configure the behaviour for OnMouseUp:
5. Go to the Properties area under Color Variables and assign the variable from the
MVis_scA01_MachineControl structure to the button for toggle color:
6. Supplement the program line in the S02_Ready action in the Machine Control control
module:
Steps 3 to 6 must be performed correspondingly for the Manual button.