Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 162)

Application example: Flying saw
Setting up communication between master modules and slave modules
162
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• The size of the transferred structure must be assigned to the dwSize input.
This step is required for all slave modules directly below the MM_A01_MachineControl
master module.
• In this example, the MM_B02_FlyingSaw machine module is the higher-level master
module of the MM_C01_Slide and MM_C02_Blade slave modules.
• Steps 1 to 3 must be executed for the MM_C01_Slide and MM_C02_Blade slave modules
in the MAP_B02_FlyingSaw_App1 module application.