MK Diamond MK-101 Pro24 - Manual (Page 29)

29
(A)
Check and adjust V-belt
tension following first 48 hours of
operation (See V-belt Inspection).
(A)
Lubricate the Guide Bar.
(B)
Lubricate the Roller
Wheel Assembly.
Ensure the saw is off and disconnected before performing any maintenance. CAUTION
MK-101 Pro24 MAINTENANCE
NEW MAINTENANCE
MAINTENANCE FOLLOWING USE
Perform the following after initial purchase and operation of the MK-101.
To extend the life of the MK-101, the following procedure should be performed after each use.
Lubricate all points listed below with light oils such as, 3 in 1, WD-40, etc.