MK Diamond MK-101 Pro24 User Manual

Page 39

Advertising
background image

39

The Horizontal alignment will ensure that straight cuts (or Rip Cuts) are made.

(A)

Position Cutting Head

to normal Cut Depth.

(B)

Move Guide Bar until Blade is

centered in Cutting Groove. Tighten

rear guide bar retaining bolt.

(C)

Pull Movable Cutting Table

to front of Tile Saw.

(D)

Position Square flat on Movable

Cutting Table against Ruler/Stop.

Position front of Square

against Blade.

(E)

Move Guide Bar until Square

rests evenly across Blade.

(A)

Move the Cutting Table back and

forth to verify Blade is even

across all points of Square.

(B)

Tighten Guide Bar

Retaining Bolts.

(C)

Move the Cutting Table back and

forth to re-verify Blade is even

across all points of Square.

MK-101 Pro24

TROUBLESHOOTING

HORIZONTAL ALIGNMENT PROCEDURE

HORIZONTAL ALIGNMENT VERIFICATION

Advertising
This manual is related to the following products: