MK Diamond MK-101 Pro24 - Manual (Page 34)

34
(J)
Remove the belt.
(K)
Install the new belt.
(L)
Verify the V-belt is seated in the
grooves of both pulleys.
(M)
Tighten the Motor Adjustment
Strap to remove slack.
(N)
Check belt tension
(proper tension 1/8-inch).
(O)
Repeat steps M and N until
proper belt tension
is achieved.
(P)
Tighten the motor
mounting bolts.
(Q)
Install the Belt Guard. Tighten
all three bolts
MK-101 Pro24 MAINTENANCE