MK Diamond MK-212 - Manual (Page 13)

13
THERMAL OVERLOAD PROTECTION
The motor is protected by a thermal overload equipped with a manual reset.
BLADE CAPACITY
The MK-212-4 (Part# 159414) uses a ten (10) inch (254 mm) diameter wet cutting continuous rim MK
Diamond blade.
The MK-212-6 (Part# 167882) uses a twelve (12) inch (305mm) diameter wet cutting continuous rim
MK Diamond Blade.
TILE TYPES
The MK-212 can cut a variety of tile types including stone, masonry, and lapidary products.
NOTE: The MK-212 is not designed to cut plastic or metals.
PRODUCT SPECIFICATIONS
The MK-212 is a versatile Tile and Stone Saw. Operated and used according to this manual, the MK-
212 will provide years of dependable service.
GENERAL DESCRIPTION
The MK-212 Saw is engineered as a stand mounted wet tile and stone saw. The saw includes a pow-
erful 120v direct drive AC motor.
MOTOR SPECIFICATIONS
Motor specifications for the MK-212 are listed in the table below.
MK-212-4 MK-212-6
Horse Power 2 hp 2 hp
Voltage 120v 120v
Overall Amperage 14.4 a 14.4 a / 6.7 a
Frequency 60 60
RPM 3400 3400
Weight 226 lbs 270 lbs
Part# 159414 167882
MK-212 SAW PRODUCT SPECIFICATIONS