MK Diamond MK-212 - Manual (Page 28)

28
MK-212 SAW MAINTENANCE
NOTE: The Diamond Blade will have to be installed onto the MK-212 with the Directional Arrow
toward the motor side of the Cutting Head for the blade to be seated correctly.
(J)
Install the new Diamond Blade
onto the Blade Shaft.
(K)
Verify the Directional Arrow of the
Blade matches the Directional Arrow
of the Blade Guard.
(L)
Install the Outer Flange.
(M)
Install the Blade Retaining Nut.
(O)
Tighten the Blade Retaining
Nut.
(N)
Verify the Blade Retaining Nut is
seated in the Outer Flange.
(P)
Close the Blade Guard.
(R)
Tighten the Blade Guard Pivot
Point Retaining Wingnut.
(Q)
Tighten the Blade Guard Retaining
Knob.