MK Diamond MK-212 - Manual (Page 29)

29
MK-212 SAW MAINTENANCE
TABLE REMOVAL
(B)
Remove the Back Stop.
(A)
Remove the Adjustable Rip Guide.
(C)
Locate the table Retaining Screws on
both sides of the cutting surface.
(E)
Remove table Cutting
Surface pieces.
(D)
Remove all Retaining Screws using
the Allen Wrench provided.
(F)
Clean the Water Pan.
(G)
Reinstall all components removed
in steps A through E.
NOTE: The rubber topped Cutting Table may be removed to clean the Water Pan or to be replaced.