MK Diamond MK-212 - Manual (Page 17)

17
(J)
Remove the Outer Flange
(K)
Install Diamond Blade onto Blade
Shaft
(M)
Install the Outer Flange
(L)
Verify the Directional Arrow of the
Blade matches the Directional Arrow
of the Blade Guard
(N)
Install the Blade Retaining Nut
(P)
Tighten the Blade Retaining
Nut
(O)
Verify the Blade Retaining Nut is
seated in the Outer Flange
NOTE: The Diamond Blade will have to be installed onto the MK-212 with the Directional Arrow
toward the motor side of the Cutting Head for the blade to be seated correctly.
MK-212 SAW ASSEMBLY
(Q)
Close the Blade Guard
(R)
Tighten the Blade Guard Pivot
Point Retaining Wingnut