If the upper gauge y coordinate is negative, If the upper gauge y coordinate is negative 109 – MTS 709 Alignment System User Manual
Page 109
Advertising
![background image](/manuals/567920/109/background.png)
Concentric Adjustments
709 Alignment System
Alignment Wizard
109
If the upper gauge Y coordinate is negative
1. Initially loosen C0.
2. Tighten C180 moving the red (upper) and blue (lower) gauge readings
together until they slightly pass each other.
3. Tighten C0 to bring the red and blue gauge readings back to
horizontally align with each other as close as practical.
Advertising