MTS 709 Alignment System - Manual (Page 47)

Software Installation
709 Alignment System Installation 47
TCPIP Configuration
Two procedures for the TCPIP configuration are provided:
• TCPIP Configuration for Systems Running Windows XP
• TCPIP Configuration for Systems Running Windows 2000
Before configuring the TCPIP address, it is recommended to unplug all network
cables except for the connection to the FieldPoint. This will ensure that the
TCPIP address is being configured for the proper device.
Note for Windows Vista Systems
Systems running Windows Vista should use the TCPIP Configuration for
Systems Running Windows XP procedure as a reference. When setting the IP
address and Subnet Mask in step 5, the Default gateway might need to be set to
the same value as the IP address.
TCPIP Configuration for Systems Running Windows XP
1. Click on Start menu bar. Click on Control Panel menu item
2. Double click on “Network Connections” icon