Base mounted 609 alignment fixture, If the upper gauge x coordinate is negative, Base mounted 609 alignment fixture 110 – MTS 709 Alignment System User Manual
Page 110: If the upper gauge x coordinate is negative 110
Advertising
709 Alignment System
Concentric Adjustments
Alignment Wizard
110
Base Mounted 609 Alignment Fixture
If the upper gauge X coordinate is negative
1. Initially loosen C90.
2. Tighten C270 moving the red (upper) and blue (lower) gauge readings
together until they slightly pass each other.
3. Tighten C90 to bring the red and blue gauge readings back to vertically
align with each other as close as practical.
Advertising