MTS 709 Alignment System User Manual
Page 26
709 Alignment System
Obtain the License File and NIC Installation
Installation
26
3. Install the network interface card. Instructions for installing the NIC into the
computer and loading the appropriate drivers are supplied with the card.
4. The second batch file should be run after you install the NIC; this will
retrieve the physical addresses of all network cards including the one just
installed for the 709 Alignment system. Running this batch file also
generates a text file with the physical address information. Locate the file
IPConfigAfter.bat that you just copied to your C:\ drive and double click to
run it. When IPConfigAfter.bat is done running, a text file
(IPConfigAfter.txt) is generated and placed on your C:\ drive.
5. Open the two text files (IPConfigBefore.txt and IPConfigAfter.txt).
Compare the two files to find the Physical Address of the Ethernet adapter
you just added (which is not in IPConfigBefore.txt). Email the Host Name
(which is listed in both files) and the Physical Address to
[email protected].
6. You will be sent the license file on a floppy disk or as an attachment to a
reply email. You will need this in
of the
section.