Thread trimming length, Thread withdrawal feed length – Brother BES-1261BC User Manual
Page 103
BES-961BC • BES-1261BC
101
Chapter 5 Setting
Thread Trimming Length
Length of thread to leave on the needle bar after thread trimming can be set for
each needle bar.
■
This function is previously set to 5 upon shipments.
1.
Press
.
2.
Select
by pressing .
3.
Press
.
4.
Select a needle bar to modify by pressing .
Press
for setting the same speed range for all needle bars.
5.
Input thread length by pressing ten keys.
Thread length can be input within the range of 1 ~ 10. Length decreases as the figure decreases.
When inputting "10", press the
0
SPACE
first.
6.
After setting is finished with all needle bars, press
E N D
.
Modified setting is saved and the previous screen is displayed again.
Thread Withdrawal Feed Length
Thread withdrawal length can be set before thread trimming.
■
The input range is 0 ~ 100mm.
■
This function is previously set to 15mm upon shipments.