Brother BES-1261BC - Manual (Page 55)

BES-961BC • BES-1261BC 53
Chapter 2 Embroidering Procedures
Switches at Machine Heads
BES-961BC BES-1261BC
■ Emergency stop button
Stops embroidering operation. "Emergency stopping" is displayed on the screen
as soon as the machine stops.
Refer to "Resetting Emergency Stop" (
→
page 119) to stop flashing.
■ Start button
Starts embroidering. Holding down this button executes embroidering at a low
speed.
When resuming embroidering after an emergency stop, release emergency stop
before pressing this button. Refer to "Resetting Emergency Stop" (
→
page 119)
for details.
Switches on Tension Plate
THREAD SENSOR lamp
HEAD switch
MENDING lamp
MENDING switch
STEP BACK/FWD switch
Emergency stop button
Start button
Start button