Brother BES-1261BC - Manual (Page 63)

BES-961BC • BES-1261BC 61
Chapter 3 Selection of Data and Embroidering
Selection of Data
Select data in order to start sewing.
■ Data to use for actual embroidering is selected from data registered in the machine
memory. A maximum of 45 kinds or 480,000 stitches of embroidery data can be
registered in the machine memory; however, depending on the combination of
embroidery data, the number of total stitches available may become less.
■ When using data in a floppy disk or in BE-100, register it in the machine memory
once before selection.
If there is no space in the machine memory, delete unnecessary data to make a
space.
Registration of Embroidery Data from Floppy Disk
Register embroidery data from a floppy disk into the machine memory.
■ Types of data to be registered are as shown below.
•
DOS-formatted data
Data format Extension Icon
ECS Data with a name of [xxxx.ECS]
Tajima Data with a name of [xxxx.DST]
Barudan Data with a name of [xxxx.DSB]
Zanks (DSK) Data with a name of [xxxx.DSZ]
Data received from BE-100 Data with a name of [xxxx.STH]
(These icons are displayed in the lower right of the screen.)
Data in a floppy disk
Reading
Sewing
Registration
Machine memory
Data created by BE-100