Brother BES-1261BC - Manual (Page 70)

BES-961BC • BES-1261BC 68
Chapter 3 Selection of Data and Embroidering
Modification of Embroidery Data Name
Name of embroidery data registered in the machine memory can be modified.
This example shows how to modify the data name "FLOWER" to "TEST003".
■ A maximum number of characters to use for an embroidery data name is 8.
■ The following kinds of characters can be used.
■ It is impossible to input a " . " or space.
Alphabetical characters (A ~ Z) Numerical characters (0 ~ 9)
Use
0
SPACE
through
9
W X Y Z
. An input character changes depending on the number of times
each is pressed as shown below.
_ (underbar), - (hyphen)
Use
1
.
.
1. Press .
Embroidery data saved in the memory is displayed.
2. A list of embroidery data is displayed. Select a screen by pressing .
3. Select embroidery data to modify the name by pressing ten keys or .
4. Press .
5
J K L
7
P Q R S
3 times
1 time
2 times
4 times
3 times
1 time
2 times
5 times
4 times
1
.
2 times
3 times
Currently displayed screen
No. of screens to be selected