Brother BES-1261BC - Manual (Page 139)

Chapter 7 Maintenance
BES-961BC
•
BES-1261BC 137
r
q
w
u
t
y
e
r
3-2 Feed Guide Section
■ Check the X-feed linear guides (3 positions) and the Y-feed linear guides (one each on the right
and left).
(Note) When greasing, be sure to use the grease tank 30 provided with the machine.
Procedure
1. Loosen 12 screws
q
, and remove the X-
feed cover
w
.
2. Loosen eight screws
e
, and remove the Y-
feed cover
r
from the right and left.
3. Loosen 13 screws
t
, and remove the bed
covers B
y
and C
u
.
4. Grease the X-feed linear guides (3
positions), the Y-feed linear guides (one
each on the right and left), and the linear
guide inside the No. 3 bed. Slide the guide
to spread grease entirely.
5. After greasing, assemble in the reverse
order.