Retrieve the embroidery data, Start embroidering – Brother BES-1261BC User Manual
Page 59
BES-961BC
•
BES-1261BC
57
Chapter 2 Embroidering Procedures
Retrieve the Embroidery Data
The description in this section is based on the method of reading data which is
registered in the memory unit of the machine.
Refer to "Selection of Data" (
→
Page 61) for details.
1.
Press
switch.
Data saved in the machine is displayed.
2.
Select a screen by pressing
keys, and select required data by pressing
ten keys or .
When using ten keys for data selection, input a numerical figure (1 ~ 9) which indicates each
data name. Required embroidery data is selected and read.
3.
Press
key.
Required embroidery data is selected and read.
Selected embroidery data is read.
Start Embroidering
1.
Press
to check the embroidering area.
2.
Press
S T A R T
to start embroidering.
Sewing is started and the next screen is displayed.