Brother BES-1261BC - Manual (Page 65)

BES-961BC • BES-1261BC 63
Chapter 3 Selection of Data and Embroidering
2. Press .
3. Select a screen for data registration by pressing .
When there is no data
4. Select an area for registration, using ten keys or , then press
.
A space available is automatically selected.
Pressing automatically locates the first space in the memory.
5. Data in the floppy disk is displayed. Press to select a screen.
Pressing displays a pattern name.
6. Select data to register by pressing ten keys or then press .
Data is newly registered in the machine memory.
Select embroidery data and press
S T A R T
. The selected data is automatically registered in the
memory and the machine enters a standby status.
If registration is done without loading a floppy disk, the following screen is displayed after the
step 4 is finished.
Load a floppy disk for data registration.
Currently selected embroidery data
Currently displayed screen
No. of screens to be selected
Data in machine memory
Number of stitches in selected embroidery data
Currently displayed screen
No. of screens to be selected
Data in floppy disk
Name of a selected embroidery pattern
(It may be the same as a file name.)
Icon indicating a kind of selected data