Brother BES-1261BC - Manual (Page 113)

BES-961BC • BES-1261BC 111
Chapter 5 Setting
Boring
Whether to validate or invalidate the boring mode and to shift data in case of boring
can be set.
■ This setting is available only for sewing data which has been created for boring.
■ The machine itself cannot check if the sewing data is for boring or not. Therefore,
make sure to check the data before starting sewing.
■ Mount the following optional accessories on the machine before starting sewing.
• Boring knife
• Needle plate for boring
■ If editing including enlargement, reduction or rotation is done using sewing data
created for boring, the correct sewing may not be available.
■ This function is previously set to :
• Boring mode valid/invalid : invalid
• Data shift valid/invalid : invalid
Validation/Invalidation of Boring Mode
1. Press twice.
2. Select by pressing .
3. Press .
4. Select by pressing .