4 attachment of embroidery hoop and frame – Brother BES-1261BC User Manual
Page 41
Advertising
Chapter 1 Preparation of Embroidery Machine
BES-961BC
•
BES-1261BC
39
4-4 Attachment of Embroidery Hoop and Frame
■
Tubular square hoop
w
q
r
e
y
u
t
1.
Insert the fixing pins of the tubular round arms R
q
and L
w
into the notches of the X-axis
feed frame
e
. Slide the arm to the right and left and lower the fixing lever
r
to fix them.
2.
Set the right and left fixtures of the tubular square hoop
t
while sliding them under the flat
spring
y
upward. Then fit the frame projecting part
u
into the hole of the tubular square
hoop
t
securely.
q
Advertising
This manual is related to the following products: