Automatic step-back – Brother BES-1261BC User Manual
Page 96
BES-961BC • BES-1261BC
94
Chapter 5 Setting
4.
Input sensitivity of the thread breakage sensor.
5.
Press
E N D
.
Modified setting is saved and the previous screen is displayed again.
Automatic Step-Back
The number of stitches to step back automatically in case of a thread breakage can
be set.
■
Setting can be done within the range of 0 ~ 10 stitches.
■
This function is previously set to 0 stitches upon shipments.
1.
Press
twice.
2.
Select
by pressing .
3.
Input the number of stitches to step back automatically by pressing ten keys.
Pressing
sets whether to execute an extra step-back by a sensitivity amount of the thread
breakage sensor in the automatic step-back mode.
When stepping back by a sensitivity
amount of the thread breakage sensor
When stepping back by preset number of
stitches
4.
Press
E N D
.
Modified setting is saved and the previous screen is displayed again.
Total number of stitches to step back in
the automatic step-back mode