Weidmuller WI-I/O-9-U2: Wireless Mesh I/O & Gateway User Manual V1.2.2 - Manual (Page 108)

107
Chapter 6 - Specifications
6.1 Specifications
Radio Transceiver
Frequency 902
–928MHz
(1)
;869.525MHz, 869.875MHz
(1)
Transmit power 1mW (+0dBm) to 1W (+30dBm)
(2)
1mW (+0dBm) to 500mW (+27dBm)
(3)
Transmission Frequency Hopping Spread Spectrum (FHSS)
(2)
Single Fixed Frequency
(3)
Modulation Frequency Shift Keying (FSK)
Receive Sensitivity -109dBm @ 19.2kbps (3% FER)
(2)
-109dBm @ 14.4kbps (3% FER)
(3)
Channel Spacing 50 x 250KHz
(2, 4)
; Single 250KHz
(2, 4)
Radio data rate 19.2 – 115.2kbps
(1, 2)
; 14.4 – 76.8kbps
(1, 3)
Range (LOS)
Typically 32Km (20 mi.) @ 1W
(2,5)
; 10Km (6 mi.) @ 500mW
(3,5)
Antenna Connector 1 x Female SMA Standard Polarity
Input/Output
Discrete Input 8 Digital I/O (1
– 4 Configurable as Pulsed Input or Output)
On-State Voltage: <2.1Vdc
Wetting Current: 3.3mA
Max I/P Pulse Rate
– DI 1/2: 50kHz, DI 3/4: 1kHz
Max I/P Pulse Width - DI 1/2: 10uSec, PI 3/4: 0.2mSec
Discrete Output 8 Digital I/O (1 – 4 Configurable as Pulsed Input or Output)
On-State Voltage
– DO Max: <0.5v
Maximum Current: 200mA
Max O/P Pulse Rate
– PO Max Rate: 1kHz
Analog Inputs 4 AI (2 Differential, 2 Single Ended)
Current Range: 0
– 24mA
Current Resolution: 14 Bits
Accuracy (Current): 0.1%
Voltage Input Range: AI 1/2: 0
– 20V, AI 3/4: 0 – 5V
Voltage Resolution: 14 Bits
Accuracy (Voltage): 0.1% full scale
Analog Output 2 AO (Sourcing)
Current Range: 0
– 24mA
Current Resolution: 13 Bits
Accuracy (Current): 0.1% (20uA)
Ethernet Ports
Ethernet Port 10/100baseT; RJ45 Connector – IEEE 802.3
Link Activity Link, 100baseT via LED
Serial Ports