Weidmuller WI-I/O-9-U2: Wireless Mesh I/O & Gateway User Manual V1.2.2 - Manual (Page 97)

96
5.3 Neighbour List (WibMesh)
Figure 85 – Neighbour List
Shows a current list of module IP addresses that the radio can hear.
Shows the time since it was last heard from and the calculated RSSI value.
This page is useful for discovering what signal levels the module has to other sites
within the system including WEIDMULLER modules on different system addresses.
The list will display all received radio messages, even if the message is not directly
communicating to it.
5.4 Neighbour RSSI (WibMesh)
Figure 86 - Neighbour RSSI
Shows the receive signal strength on each of the 50 available channels within the
frequency band. To find out if the path between two neighbouring units has a multipath
fading issue, enter the radio IP address of the neighbour you wish to view and press