Weidmuller WI-I/O-9-U2: Wireless Mesh I/O & Gateway User Manual V1.2.2 - Manual (Page 91)

90
4.4.8 Feature Licence Keys Web Page
Allows the module to be upgraded with enhanced features or upgraded to a more
advanced model .i.e. enabling the Modbus option.
The Feature Licence unlock codes are purchasable by contacting Weidmuller or your
local distributor. The module serial number is needed to generate the Feature Licence
Key. The serial number can be found on the main start-up web page of the module, for
details on what this looks like see Figure 25
– Main Welcome Screen on page number
47 of this manual.
Demonstration Mode
Selecting demonstration mode enables ALL feature licence options temporarily. This
mode is activated by selecting the checkbox and then
pressing the ‘Save Changes and
Reset’ button. After Reboot the page will display ‘Active’ indicating the Demonstration
Mode has been activated.
The Demonstration Mode will allow full operation of all Feature licences for 16hrs
or until the module has been restarted.
Feature Licence Keys
The upgrade or advanced features are made available by entering in the purchased
“Feature Licence Key” into the appropriate box next to the feature or enhancement.
After entering the code press
the “Save Changes and Reset” button.
The screen will indicate the validity of the code by showing a green tick or a red cross.
Figure 82 - Feature License Keys
Feature Licence Keys are retained even if module is returned to factory defaults.
Figure 81 - Demo Mode Not Active
Figure 80 - Demo Mode Active