Weidmuller WI-I/O-9-U2: Wireless Mesh I/O & Gateway User Manual V1.2.2 - Manual (Page 37)

36
2.5.6 Analog Outputs
The WI-I/O 9-U2 module provides two 0 - 24 mA DC analog outputs for connecting to
analog inputs on equipment such as PLC’s, DCS, Loggers, etc. or connecting to
instrument indicators for the display of remote analog measurements.
The WI-I/O 9-U2 Analog outputs are a sourcing output and should be connected from
the analog output terminal through the device or indicator to Common. See diagram for
connections.
The LEDs provide level indication depending on current - Dim for 4mA and Bright for
20mA
Figure 21 – Analog Outputs
WI-IO 9-U2